This unit with 2 furnaces of 55 tons capacity each, is located at the beginning of the factory production line. Under supervision of experienced experts, aluminum bullions are molten continuously with required alloy at the temperature of 750 Celsius and produce aluminum coils from 800 to 1350 mm width with 5 to 10 mm thickness. Required chemical ingredients for desired alloy is added at this stage.

To make sure desired alloy cast, after each time of charging the furnace, melted material is tested by QC experts for standards conformity and continuation of production.

The inner diameter of coils are 500 or 600 mm and outer diameter is adjustable up to 1350 mm. For control and follow up each produced coil in the Caster Line, an ID card is issued and all required information regarding quality and quantity of production is inserted in and is attached   to the coil up to delivery of final production to the store.